|Party Girl punchneedle pattern|
Sleepytown Sentinels is stitched with a combination of Valdani hand-dyed three strand floss, Weeks Dye Works hand-dyed embroidery floss, and DMC embroidery floss.
And Party Girl is stitched with Valdani hand-dyed three strand floss and DMC embroidery floss.
Both patterns are now up on the website and I'll have some kits for both of them up soon, as well as for Happy Harvest punchneedle. All of the patterns include the pre-printed weaver's cloth.
I also thought I would take this opportunity to show you how I frame my needlework, whether it be punchneedle, cross stitch, embroidery, etc.
You will need a frame, acid-free foam core board and a sharp awl.
If your frame needs a hanger, make sure you attach that first before you begin.
Cut a piece of foam core board to fit the inside of the frame snugly.
Next, use the awl to poke holes around the perimeter of the foam core board.
Cut your mounted needlework the same size as the foam core board.
Place your needlework on top of the foam core board and use binder clips to stretch it taut.
Use a needle and thread to stitch the needlework to the foam core board, poking the needle through the holes in the back, coming up to the front, then around the foam core board to the back and through the next hole.
As you stitch around, remove the binder clips as you come to them.
Here is the finished mounted stitchery before being placed into the frame.
For a bit of added padding, you can add a layer of thin cotton batting between the stitchery and the foam core board, which is what I did with this piece.
Just pop it into your frame and it's ready to hang! It probably won't be loose, but you can add glazier points just in case.
If you start your Fall and Halloween stitchery now, it will be ready for the season! Happy stitching and framing!
Until next time,